How to Prevent of the Warp of Laminate Flooring?

Warp is the usual problems of laminate flooring. The reason most of the string is the son of water. Other factors such as poor quality, improper installation, a temperature too high and too heavy a pressure laminate faults. The swelling ratio of most laminate flooring is about 4%. If too much water or steam is the evidence of the need to laminate, the panels developed in sizes too big. They are deformed, since there is no such space boom in the joint. To assist some poor quality laminate chains even a little water in his equipment. Therefore, the following points should be supported: 1 Laminate can be a lot of water, such as bathroom or kitchen space. 2. The water must be released once when it splashed onto the floor and in large quantities. 3. What is the problem of the distortion caused by water, water penetrates into the material surface for most cases. It is very difficult for water to penetrate the first layer, the layer of wear resistance. The possible “leakage” is the joint. The wax can be used on the locking system for the production of laminate do much more resistant to moisture. The wax on the locking system can withstand water can penetrate into the nucleus. 5. Some areas are very wet. And steam is often stratified. It is better to select sub-layer thicknesses. So it is better if a double wall of the subfloor with PE are foil. Laminate warps because of rain in many cases, especially neighouring rolled the window. Many users often forget to close the window at the rain, preventing the on the ground, too. Thus, the widow, before you leave the house or it starts to rain will be closed. Improper installation can bend. Therefore, the following points should be supported: 1 The ground is very dry. The moisture content of subfloor should not exceed 12%. 2. There must be at least 8mm wide expansion space between wall and laminate. 3. Do not press the laminate accessories such as skirting boards, to prevent them from freely suspended. 4. Step, and furniture to the newly installed laminate flooring for 24 hours since installation. Excessively high temperatures can also channel bottoms. It has a thick cushion used to keep things with too high a temperature as the working language of iron, then place it on the floor. The problem of the chain, as so often in place of heavy traffic. Class AC1 and AC2 are laminate flooring suitable for heavy traffic, it can not withstand abrasion and heavy pressure. Thus, only AC3, AC4 or AC5 should be used instead of heavy traffic.

• Bookmark :
• Digg
• del.icio.us
• Stumbleupon
• Redit it